Warehouses, distribution centers, manufacturing plants, and flex space. Licensed, bonded, and insured general contractor delivering industrial projects across Georgia and Florida since 2016.
Square footage, site details, and timeline. Detailed estimate within 48 hours.
Industrial construction isn't commercial construction with higher ceilings. The equipment loads, utility demands, and operational tolerances are in a different category entirely. The wrong contractor learns that on your dime and your timeline.
Manufacturing equipment can load floors at over 1,000 PSF. We engineer foundations and slabs for your specific equipment layout — point loads, dynamic loads, vibration isolation for precision processes. Your machines work correctly because we designed the building around them, not the other way around.
Industrial facilities demand 3-phase power, high-volume water, compressed air, and sometimes natural gas at volumes that make commercial buildings look like houses. We coordinate utility infrastructure during pre-construction — with the actual utility providers — so your facility has the capacity you need on day one. Not a promise. A verified commitment.
Expansions and renovations on active industrial sites require surgical precision. We phase construction around your production schedule, maintain OSHA safety separations, and coordinate shutdowns only when absolutely necessary — always with advance notice and a written recovery plan. Your throughput stays protected.
In industrial construction, a delayed building means delayed revenue — every single day. We publish weekly schedule updates with earned-value tracking so you always know where the project stands. No surprises. No "we'll make it up next month" promises that never materialize. Licensed and insured in both Georgia and Florida.
"A. David and his team were professional from start to finish. They kept us informed every step of the way and delivered exactly what was promised."
"Bowser Construction Group handled our build-out with incredible attention to detail. On time and on budget."
"Licensed, insured, and genuinely accountable. BCG is the real deal for construction in Georgia and Florida."
Every day your facility isn't operational is revenue you never recover. We build backward from your production start date.
From raw material receiving to finished product shipping, we build the facilities that make your operation work.
Clear-span warehouses with optimized dock-door configurations, clear heights to 40'+, and heavy-duty floor slabs for racking and material handling equipment. Pre-engineered metal building and conventional steel options across Metro Atlanta and Central Florida.
Warehouse ConstructionFulfillment and distribution facilities built for throughput. Cross-dock configurations, conveyor-ready layouts, and climate-controlled zones for temperature-sensitive logistics in Forsyth County, Fulton County, Orange County and surrounding areas.
Distribution Center ConstructionProduction environments engineered for your specific process. Heavy equipment foundations, specialized utilities, ventilation systems, and automation-ready infrastructure. Wood frame, steel, tilt-up concrete, and pre-engineered depending on your operational requirements.
Manufacturing Facility ConstructionRefrigerated warehouses, food processing environments, and controlled-atmosphere facilities with specialized insulation, refrigeration coordination, and compliance with FDA and USDA requirements. Built for operations that can't afford temperature failure.
Cold Storage ConstructionWe don't build buildings. We build the infrastructure that makes your business produce revenue. Every decision we make on your industrial project filters through the question: how does this impact your ability to operate?
We start with your production workflow, equipment specifications, and throughput requirements before we draw the first line. The building serves the operation — not the other way around.
Industrial-grade electrical, high-volume plumbing, compressed air, process gas, reinforced slabs, crane-ready structural steel. We coordinate the systems commercial contractors don't typically handle.
Expansions and renovations on operating facilities require a contractor who can work around your production without compromising safety or schedule. We've done it across Georgia and Florida. We do it well.
Your project manager is on site daily with a direct line. Weekly progress reports, same-day answers, and zero layers between you and the person running your build. That's how we've operated since 2016.
Industrial facilities fail when the contractor treats pre-construction as a formality. We treat it as the most valuable phase of your project because every decision made here compounds through the entire build.
Soil bearing capacity for your specific equipment loads. Utility demand calculations matched against available infrastructure. Zoning and environmental compliance. Phasing plans that keep your existing operations running during expansion. Line-item cost estimates organized by CSI division so you see exactly where every dollar goes.
Four phases. Clear milestones. You know where your project stands at every stage.
We evaluate your site, review equipment specifications, map utility requirements, and define the operational parameters that drive every design decision. You receive a feasibility assessment and preliminary cost range within two weeks.
Detailed plans engineered for your specific operation. Structural calculations for your equipment loads, utility coordination with local providers, permitting, and a final guaranteed cost with CSI-formatted line items. No lump-sum guessing.
Dedicated superintendent on site daily. Weekly progress reports with schedule tracking and budget status. Equipment vendor coordination for rough-in requirements. Active-site phasing that maintains safety separations and minimizes operational disruption.
Systems tested. Utilities verified. Punch list completed. You receive as-built drawings, warranty documentation, and a facility ready for equipment installation and production startup on the day we promised.
Tell us about your operation, your facility requirements, and your timeline. A square footage range and a target budget is all we need to give you a preliminary cost assessment and next steps.
Now scheduling industrial projects across Georgia & Florida.
Facility type, square footage, and a target budget — that's all we need to start. Every estimate includes scope, cost breakdown, and a preliminary schedule.
Warehouses, distribution centers, manufacturing plants, cold storage facilities, food processing environments, light industrial buildings, and industrial expansions and renovations across Georgia and Florida. Ground-up new construction and tenant improvements in existing industrial spaces, with offices in Cumming, GA and Winter Park, FL.
Standard warehouse construction typically ranges from $45 to $85 per square foot for shell. Manufacturing facilities with specialized systems range from $100 to $250+ per square foot depending on equipment requirements, utility infrastructure, and environmental controls. Cold storage commands premium pricing due to insulation and refrigeration systems. We provide detailed, line-item estimates within two weeks.
A standard 20,000–50,000 SF warehouse typically takes 6 to 10 months from groundbreaking to occupancy. Distribution centers in the 100,000+ SF range require 10 to 16 months. Manufacturing facilities with specialized infrastructure take 12 to 18 months. Pre-engineered metal buildings can significantly compress timelines.
Yes. Active-site construction is one of our core capabilities. We develop phasing plans that maintain safety separations, coordinate utility tie-ins during planned shutdowns, and sequence work to minimize production impact. We've expanded facilities across Forsyth County, Fulton County, and Orange County while maintaining continuous client operations.
Yes. Pre-engineered metal building systems are an excellent option for many warehouse and light industrial applications — faster construction timelines, competitive pricing, and clear-span capabilities. We coordinate from design through erection and interior buildout.
Georgia: Metro Atlanta and North Georgia including Alpharetta, Cumming, Roswell, Johns Creek, Milton, Canton, Duluth, Suwanee in Forsyth, Fulton, Gwinnett, Cherokee, DeKalb, Hall, and Dawson counties. Florida: Orlando, Winter Park, Lake Nona, Sanford in Orange, Seminole, Osceola, Lake, and Volusia counties.
Call (470) 230-3331 or submit the form above. Share facility type, approximate square footage, equipment requirements, budget, and timeline. Preliminary cost ranges within 48 hours. Detailed line-item estimates within two weeks.
Metro Atlanta, North Georgia, and surrounding counties — commercial, residential, and industrial construction.
Central Florida and the greater Orlando metro — same licensed, insured operation and quality standards we deliver in Georgia.
Office build-outs, retail, medical, and tenant improvements.
Learn MoreCustom homes, renovations, and luxury residences across Georgia and Florida.
Learn MoreApartments, townhomes, senior living, and mixed-use development.
Learn MoreOne team, one contract — from concept through completion.
Learn MoreLicensed general contractor serving Georgia and Florida since 2016.
Learn More